Setting the Clock on the C3D Pedometer


The C3D Pedometer will exit the programming mode if 10 seconds pass without a button press. If you make a mistake or it exits the programming mode, you can simply restart programming.

When Clock format is set to 12H, the screen will only display PM, for AM hours, AM is not shown. 


Step 1: Setting the Clock

  • Press MODE until you see on the top of screen

  • PRESS & HOLD SET until the display shows the icon SETUP and the digits start to blink


  • PRESS RESET to toggle 12H (PM) or 24H (13:00)

  • PRESS SET to save clock format and enter clock setting mode

  • PRESS MODE or RESET to adjust HOUR

  • PRESS SET to save hour and adjust minutes

  • PRESS MODE or RESET to adjust MINUTES

  • PRESS SET to save minutes and choose unit of measurement

  • PRESS SET to save units and enter stride setting mode
  • PRESS SET to save stride and enter weight setting mode
  • PRESS SET to save weight and enter step target mode
  • PRESS SET to save daily step target.


Congratulations your Clock is Set!




View & Buy OZO Fitness Pedometers at: