Follow-Along Videos


1) A follow-along setup video for your Pedometer (under 4 minutes)

2) A how to get the most accurate results on your Pedometer video


The SC1 Pedometer you have calculates both miles and kilometers. 


You can change from Kilometers to Miles by selecting the relevant weight measurement (lbs or Kg.)


Once you indicate that you want your weight calculated in pounds, the SC1 Pedometer will automatically start tracking miles. Alternately, if you select Kg, it will calculate kilometers.


For the most accurate step counts it is important to set your weight and stride length correctly. 


SETTING YOUR WEIGHT on the SC1 Pedometer

 

In “STEP” mode, press & hold “SET” until the display shows the icon “SET” and the digits start to flash

If your unit is asleep, press MODE button to wake it up first, then press & hold “SET” until the display shows the icon “SET” and the digits start to flash

 

Setup screen

 

 

 


 

Hold SET till screen flashes to enter setting sequence:

 

Press SET to confirm 12/24 hour format and move to Clock Setting

Press SET to save hour and move to select minute (it should be flashing)

Press SET to save minute and move to select KG or LB (metric/imperial unit system)

Press RESET to select KG or LB

Press SET to save and move to Set Weight

Press RESET until you have your desired weight

Press SET to save

 

Press MODE or leave unit idle for approx. 10 seconds to exit