It is easy to change settings on your Pedometer.  Let me illustrate two examples for you


EXAMPLE #1: CHANGING THE CLOCK TIME


Begin Programming, with Pedometer on the Clock Screen.  
It shows Time in the top left corner of the screen



Click the WHITE button to navigate between screens, until you get to the clock.


  • Press & HOLD “SET” button ADJ flashes when the HOUR flashes release the button
  • Press “RESET” to advance the HOUR to desired time
  • Press “MODE” to set the minutes (minutes will flash)  
  • Press “RESET” to advance the minutes to desired time
  • Press “MODE” to move to seconds (seconds will flash)  
  • Press “MODE” to move to setting 12 or 24 hour clock format. 
  • Press “RESET” to select 12 or 24 hour. When desired format is flashing
  • Press “MODE” to move back to hour (hour will flash)
  • Verify time is set correct with A or P if using 12Hr clock format.
  • If not, Press "RESET" to advance the Hour to correct time.
  • Once correct time is showing, Press "SET" to save.
Choose your clock format:

12Hr is the default and will have a clock with AM and PM

24Hr will show a clock with military time, it will show 13:00 hours instead of 1PM.


(Please note if you choose 24Hr format there won't be an A or P displayed)


If you pass the number you wanted, just keep pressing the RESET button and it will cycle back around.


Watch a Video of how to setup the Clock if you prefer:


Congratulations Clock Setup is Complete


=========================================================================== 


EXAMPLE #2: CHANGING THE WEIGHT


Begin Programming, with Pedometer on the Step screen, the one right after the clock.

It shows Step in the bottom right corner of the screen



  

Click the WHITE button to navigate between screens, until you get to the Step screen.



  • HOLDSET” button until ADJ flashes when you see UNIt release the button
  • Press “MODE” to accept Miles or Press “RESET” to switch to KM, then Press MODE to move to weight
  • Press “RESET” to advance to desired weight (Set weight as low as 44 Lbs. by cycling past the max. of 441 Lbs.)

    If you don't want to change anything else, Press "SET" to Save and Exit.

  • Press “MODE” to set Stride Length  
  • Press “RESET” to advance to desired Stride Length
  • Press “SET” to Save





Hold RESET button down to 
advance numbers faster.


Congratulations your Weight & Stride Setup are Complete!