Setting the Clock on the C3D Pedometer

The C3D Pedometer will exit the programming mode if 10 seconds pass without a button press. If you make a mistake or it exits the programming mode, you can simply restart programming.

When Clock format is set to 12H, the screen will only display PM, for AM hours, AM is not shown.

Step 1: Setting the Clock

Press MODE until you see on the top of screen
PRESS & HOLD SET until the display shows the icon SETUP and the digits start to blink
PRESS RESET to toggle 12H (PM) or 24H (13:00)
PRESS SET to save clock format and enter clock setting mode
PRESS MODE or RESET to adjust HOUR
PRESS SET to save hour and adjust minutes
PRESS MODE or RESET to adjust MINUTES
PRESS SET to save minutes and choose unit of measurement